Belt Calibrations In addition to the items above, a shortcut menu is available, which duplicates the functions provided by the Edit, Calibrate, and Test Calibration buttons. To display the shortcut menu, right-click on a process in the Processes group. The following menu opens: Belt Calibrations Group Shortcut Menu For a description of the items on this menu, see the corresponding item in the previous table. Creating a Belt Calibration When a belt calibration is required, the Process Manager displays the Belt object name with an alert icon ( ) in the Belt Calibrations Group.
The belt is calibrated using the Belt Calibration wizard, which is accessed from the Calibrate button in the Belt Calibrations group. After the belt is calibrated using the wizard, the stored calibration values can be manually edited. Editing the Calibration Parameters NOTE: The belt must be calibrated using the wizard, before the values can be manually edited. For details, see Using the Calibration Wizard in the next section. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 849 Item Description Belt [Encoder] The belt and encoder specified for the process. Double-click this item or click Edit to display the Belt Calibration Editor.
For details, see Editing the Calibration Para- meters on page 849. Calibrate Click to teach the selected process. For details, see Using the Calibration Wizard on page 852. Edit Click to edit the selected belt calibration. For details, see Editing the Calibration Parameters on page 849. Robot The robot specified for the belt calibration. Double-click this item or click Edit to dis- play the Belt Calibration Editor. For details, see Editing the Calibration Parameters on page 849. Test (Test Cal- ibration) Click to test the current belt calibration. For details, see Testing the Belt Calibration on page 854. This button is dimmed (not available) until the belt has been cal- ibrated.