Configuration Items l You can expand or collapse a tree branch by clicking the '+' or '–' icons next to an item name. l You can double-click any of the Position objects (idle or robot) or select the Position object and click Edit to open the location editor, which can be used to manually enter the object location. For details, see Location Editor Types on page 858. l You can click Grid and use the Motion Sequence Grid Editor to edit the motion parameters and off- set locations. For details, see Motion Sequence Grid Editor on page 866. Location Editor Types There are two types of location editors:
a simple editor, which allows you to enter location information; and an enhanced position editor, which contains additional sections, such as Move Parameters, Move Con- figuration, Approach/Depart Parameters, etc. For example, the Idle Position editor, shown in the following figure, is an enhanced position editor, which contains additional properties for Move Parameters and Move Configuration. NOTE: The editor title bar indicates the type of parameters being edited: Idle Position, Pick Motion Para- meters, or Place Motion Parameters. ACE User's Guide, 3.6.x 18316-000 Rev A Page 858