Configuration Items The Approach Segment, Motion Segment, and Depart Segment tabs allow you to edit the cor- responding parameters for each segment of the robot motion. For details, see Approach/Mo- tion/Depart Segment Move Parameters on page 860. The Offset tab allows you to edit the gripper (tool) offset. Vision on the fly refinement: The Motion Segment tab allow you to edit the parameters for that segment of the robot motion. For details, see Approach/Mo- tion/Depart Segment Move Parameters on page 860. The Start Location and End Location tabs allow you to edit the start and end points for the robot path through the camera FOV.
The Trigger Percent tab allows you to edit the robot-motion point (as a percent of the com- plete motion) where the picture request is triggered. Robot Frames Robot frames (also known as reference frames) are useful because they allow you to teach locations rel- ative to the frame. If the location of the frame changes in the workcell, you simply have to update the frame information to reflect its new location. Then you can use any locations created relative to that frame without further modifications. A process pallet is typically taught relative to a reference frame.
This avoids the problem of teaching many individual pallet positions, having the pallet move for some reason, and then having to reteach all of those positions. Instead, the pallet is taught relative to a frame. If the pallet moves in the workcell, the frame pos- ition is re-taught and the part positions relative to that frame remain intact. The Robot Frame editor is used to teach a reference frame, such as a pallet frame. For example, if you double-click a Pallet object in the Configuration Items group, the Robot Frame editor opens. ACE User's Guide, 3.6.x 18316-000 Rev A Page 864