Process Strategies 4. Edit the parameters for the selected item. 5. Click OK to close the editor. Parameters Editors The parameters area of the Process Strategy Editor changes, based on the selected item. The available parameter editors are described in this section. Controller Parameters The Controller Parameters are displayed when the controller is selected in the Process Strategy Editor. The Controller Parameters group is used to specify custom V+ programs for the selected controller. Controller Parameters For this screen, the parameters are: ACE User's Guide, 3.6.x 18316-000 Rev A Page 880 Item Description Use Custom Mon- itoring Program The default process monitoring:
Checks for updates to process strategies l Handles belt monitoring l Monitors parts and part targets l Checks that the ACE server is running l You can copy the default V+ monitoring program for editing, or select an existing program. Use Custom Ini- tialization Program The default initialization program initializes the belt control parameters and application before the control programs (robot, belt, process strategy, etc.) are started. You can copy the default V+ initialization program for editing, or select an existing program.