Sensor Calibrations For a description of the items on this menu, see the corresponding item in the previous table. Creating a Sensor Calibration When a sensor calibration is required, the Process Manager displays the Sensor object name with an alert icon ( ) in the Sensor Calibrations Group. There are four types of sensor calibrations (the sensor calibration required depends on the type of part sensor selected for the Part or Part Target). For details, see Part on page 829 and Part Target on page 841. The sensor calibration types are:
l Belt camera (see Belt Camera Calibration on page 914 for details) l Fixed camera [downward-looking camera] (see Fixed Camera Calibration on page 917 for details) l Latch sensor (see Belt Latch Calibration on page 915 for details) l Spacing reference (see Spacing Reference Calibration on page 918 for details) l Refinement camera [upward-looking camera] (see Refinement Camera Calibration on page 918 for details) For details on the vision windows and image-editing controls in the wizards, see the ACE Sight User's Guide . The sensor is calibrated using the Sensor Calibration wizard, which is accessed from the Calibrate button in the Sensor Calibrations group.
After the sensor is calibrated using the wizard, the stored calibration values can be manually edited. Editing the Calibration Parameters NOTE: The sensor must be calibrated, or loaded from a previously-saved calibration data file, before the values can be manually edited. For details, see Using the Calibration Wizard in the next section. After the sensor is calibrated through the Sensor Calibration wizard, you can manually edit the stored sensor-calibration parameters, such as the robot-to-sensor offset. These parameters are edited using the sensor Calibration Editor. To access the sensor Calibration Editor, click Edit in the Sensor Calibrations group. The Sensor Calibration Editor opens.
The Sensor Calibration Editor contains the sensor properties configuration parameters. These are used to configure various settings of the selected sensor. The bottom area of the Sensor Calibration Editor displays online help for the selected parameter. NOTE: Because online help for each parameter is provided directly in the editor, it is not duplicated in this documentation. For example, the following figure shows the Latch Calibration Editor, which has one property for controlling the calibration offset. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 911