Sensor Calibrations Sensor Calibrations Group The calibration wizard provides an interactive series of steps that guide you through the calibration pro- cess. Each step of the wizard contains graphical aids and text that describe the particular step being per- formed. As each step of the wizard is completed, the information from that step is collected and used to populate the fields in the Sensor Calibration Editor. For details, see Sensor Calibrations on page 909. For details on the buttons and indicators on the wizard pages, see Wizards on page 181.
The Belt Latch Calibration wizard includes controls for moving the belt, along with visual indicators for belt on/off, fast/slow, reverse/forward, and latch detected, which show the current state of the conveyor and latch signal. Belt Controls and Visual Indicators To access the Belt Latch Calibration wizard: 1. Click Calibrate in the Sensor Calibrations group. The wizard initializes and opens the first page. 2. Read and follow the instructions shown on the wizard page. 3. When you have completed the procedure for the current wizard page, click Next to continue. The next page of the wizard opens. 4. Repeat this process until you get to the end of the wizard procedure.
When you complete the last page, the sensor calibration is finished and the wizard closes. ACE User's Guide, 3.6.x 18316-000 Rev A Page 916