omron — Code and Description List

Code and Description List ACE User's Guide, 3.6.x 18316-000 Rev A Page 936 Code Description C R G CV BE L F P PT Pa Cs O -20019 Starting the V+ code on the controller. x -20018 Preparing the robots for control. x -20017 Defining the belt parameters on the controller. x x -20016 Initializing code on the controller. x -20015 Writing data objects to controller. x -20014 The startup program does not exist. x -20013 The specified robot place program does not exist. x -20012 The specified robot pick program does not exist. x -20010 The specified gripper index does not exist. x -20009 The specified process index is invalid. x -20008 The custom strategy program does not exist.

x -20007 The custom belt program does not exist. x x -20005 Vision tool execution failure. x -20004 Unable to open the gripper tip x -20003 Unable to close the gripper tip x -20002 Unable to allocate a part to the robot. x x -20001 Initializing controller. x -20000 Unknown Error. x 2000 No processes has been selected for the robot. x x 2001 The robot is waiting for instances of type '{0}' to become available. x 2002 Robot is waiting because of a cycle stop request. x 2003 One or all of the encoders associated with the belt do not appear to be moving. x