Online to Transfer Monitoring Monitoring Force On Force Off Force On Force Off Online to Transfer Program Check Program Check Online Edit Online Edit 17. Find Function - 2 Retrace Find of Ladders The function retraces ladder rungs so that you can find the causes of the coils not turned on. (1)The reason why the coil 3.00 is not turned on is that its contact 2.00 is not turned on. Therefore, the function retraces rungs to find the coil 2.00. (2)Move the cursor to the following position (contact 2.00) and press the [Space] key. Space (3)The reason why the coil 2.00 is not turned on is that the contact 1.00 or 1.01 is not turned on.
Suppose the cause is the contact 1.00 and find the coil of 1.00. Move the cursor to the contact 1.00 and press the [Space] key as well as the above operation (2). Space (4)If this rung is not a cause press [Shift]+[Space], and you will able to go back to the rung before you started to find this rung. Space Shift