AutoVISION Quick Start Guide December 2020 5.8. Try All Tools Try all the vision tools in the job to confirm that they are configured as desired. a. [Tryout Once] button will capture a new image and run all tools, once on the PC. Look at status indicators. A green check means the tool has passed. A red X means the tool has failed, for reason such as wrong count, or out of tolerance. b. Tryout Loop button will capture a new image and run all tools. Once completed it will repeat this process continuously until the Stop Loop button is pressed. Additional Information In case of using Emulator mode a. Tryout the images in selected folder one by one. b.
The available image are the one acquired by MicroHawk smart camera series or TIFF/BMP/PNG image of same resolution. a b