AutoVISION Quick Start Guide December 2020 9. Save Job to flash memory on camera Saving the job to flash memory on the camera is required to allow the camera to load and restart the job on power up. a. Select the [Edit] view in navigator bar. b. Confirm that the job is correct and has been saved to the PC. Additional Information About file save type It is recommended that you select File > Archive Job… This will save the job to the PC and create an Archive file (*.avz) that contains the job and additional support files used by the job. c. Select the camera flash memory icon d. Select the memory slot to write i. Select [New Slot] to write this job to the camera. ii.
If jobs exist on the camera, selecting an existing slot will overwrite that memory slot. c d e. A pop-up window may appear which will allow you to overload the desired job to the camera. e