AutoVISION Quick Start Guide December 2020 3. Connect to the Camera Select the device to be used with AutoVISION. a. Select the camera in the drop-down box. Additional Information Select [Emulator] if you want to verify by saved images a b. The F430-F camera is set by default as below. Set your computer to a compatible address or if the network parameters need to be changed. i. Click [Details] button to see the IP Address ii. Click [Modify] to make changes. This may request to reboot your camera. Modification is reflected when reconnection is completed. c. Select [Create a New Job]. IP address 192.168.188.2 Subnet mask 255.255.0.0