3-18 Maintenance 3. Maintenance Manual 3.1.4.6 Replacement of wiper blade Removal procedure 1. Replace the wiper blade. a. Power off the vehicle, move the wiper combination switch to the MIST gear and hold it for 3 seconds to enter the wiper maintenance mode. b. Press the wiper blade fixing clip A, and take out the wiper blade ① in the B direction. c. Replace the wiper blade with a new one. Refitting procedure The refitting procedure is performed in reverse order. CAUTION: - After the vehicle is powered on again, the wipers will automatically reset and exit the maintenance mode.
- After the refitting is complete, power on the vehicle, turn on the wiper spray mode, check whether the wiper is running normally, make sure the wiper is refitted in place, and turn off the wiper switch. VOYAH FREE