3. Maintenance Manual 3-9 Maintenance 3.1.4 Vehicle maintenance inspection 3.1.4.1 Replacement of engine oil and oil filter 1. Turn off all electrical appliances and the start switch. a. Unscrew the engine oil filler cap ① . b. Lift the vehicle, unscrew the drain plug ① , and collect the engine oil with a graduated container. c. Every time the lubricating oil is replaced, the seal ring inside the drain plug must be replaced at the same time. d. Tighten the drain plug ① with the specified torque. Tightening torque of drain plug: 30±3Nm. CAUTION: - Dispose of the drained oil according to regulations! - The removed drain plug must be cleaned before replacing the new internal seal ring.
- If the thread of the drain plug is damaged, replace the drain plug and seal ring. - Excessive tightening torque may cause leakage of the drain plug or even damage to the oil sump. VOYAH FREE