SAFETY Safety Precautions Follow the guidelines of the EPA or other governmental agencies for the proper disposal of hazardous materials such as engine oil, diesel fuel and engine coolant. Consult the local authorities or reclamation facility. The safety messages that follow have NOTICE level hazards. Any part which is found defective as a result of inspection or any part whose measured value does not satisfy the standard or limit must be replaced. NEVER dispose of hazardous materials by dumping them into a sewer, on the ground or into groundwater or waterways. ALWAYS tighten components to the specified torque. Loose parts can cause equipment damage or cause it to operate improperly.
If any indicator illuminates during engine operation, stop the engine immediately. Determine the cause and repair the problem before continuing to operate the engine. Only use replacement parts specified. Other replacement parts may affect warranty coverage. NEVER attempt to modify the engine design or safety features such as defeating the engine speed limit control or the diesel fuel injection quantity control. Make sure the engine is installed on a level surface.
If a Yanmar Marine engine is installed at an angle that exceeds the specifications stated in the Yanmar Marine Installation Manuals , engine oil may enter the combustion chamber causing excessive engine speed, white exhaust smoke and serious engine damage. This applies to engines that run continuously or those that run for short periods of time. Modifications may impair the engine’s safety and performance characteristics and shorten the engine’s life. Any alterations to this engine may void its warranty. Be sure to use Yanmar genuine replacement parts. 2-6 BY Service Manual © 2009 Yanmar Marine International