EuroV MBE 900 Operators Manual Visually inspect all lines and hoses. Listen for any sound of leaking. Make sure all pipes and hoses are undamaged, correctly positioned to avoid chafing, and properly secured. Valve Lash Checking and Adjusting Visually inspect all lines and hoses. Listen for any sound of leaking. Make sure all pipes and hoses are undamaged, correctly positioned to avoid chafing, and properly secured. The special tool listed in is required for this procedure. Table 9. Gaining Access to the Valves Gain access to the valves as follows: NOTE: Clean the cylinder head cover before removing it. 1. Remove the cylinder head cover. 2. Remove the inspection cover on the timing case. 3.
Fit the cranking device into the inspection hole on the timing case. All information subject to change without notice. 31 DDC-SVC-MAN-0207 Copyright © 2019 DETROIT DIESEL CORPORATION Service Tools Used in the Procedure Tool Number Tool Name Tool Graphic J-46392 Engine Cranking Tool