Maintenance 5 5.7.5. Maintenance every 10 operating hours Lubrication of articulated steering There is danger of severe accidents, if you perform mainte nance work at a machine that has not been parked and secured correctly! Park the machine on a solid, even surface and secure it, before you start to perform maintenance work. 1. Before you start maintenance work, park and secure the machine as described in the chapter "5.1Maintenance guide 5-2". 2. Clean the grease nipples marked by arrows. Articulated steering (2 points) 3. Use a grease gun to fill the grease nipples with a sufficient volume of lubricating grease. 4. Remove the used lubricating grease that is pressed out of the bearings.
NOTE Perform lubrication more frequently, when working in a con tinually wet or salty environment. WA90-5 – VEAM270100 5-41 DANGER DANGER