Special equipment and attachments 7.1. E.C.S.S-electronics 7.1.3. Operating the E.C.S.S-electronics Switching ON the E.C.S.S.-electronics 1. Precondition: Speed range No. 2 must be switched on in order to ensure that the E.C.S.S. system can be activated. To do this, press the "Driving range up to 20 km/h" button. 2. Press the E.C.S.S-electronics switch. The green control lamp in the switch lights up. If the machine drives faster than 5 km/h, the E.C.S.S- electronics is automatically activated and the E.C.S.S- electronics control lamp lights up on the dash panel. If the machine drives slower than 5 km/h, the E.C.S.S- electronics is switched off and the control lamp on the dash panel goes out.
However, the control lamp in the E.C.S.S-electronics switch remains lit in green. NOTE To ensure that the E.C.S.S. system can remain fully effective when the machine is underway, do not tilt the bucket all the way through till it touches the limit stops. Do not support the boom when on the road. Switching OFF the E.C.S.S-electronics 1. Press the E.C.S.S-electronics switch. The control lamp in the switch goes out. WA90-5 – VEAM270100 7-3