2.3. Precautions for maintenance Safety 4. Screw in the fastening screws for the cab (2 left, 2 right) and tighten the screws. Torque = 230 Nm. 5. Remove the lever from the pump and fasten it to the radiator. 6. Reattach the cover. 7. Screw in 3 cover fastening screws on each side of the machine (see arrows) and tighten the screws. Torque = 25 Nm. 8. Close the bonnet. Tipping up the driver's cab (option with electric actuator) 1. Park the machine on solid, level ground. 2. Lower the work unit to the ground and switch off the engine. 3. Close the cab door. 4. Use the locking bolt to secure the articulated steering (cross- reference "Securing the articulated steering", Page 2-24).
NOTE The machine has to be positioned straight and the articu lated steering has to be secured with the locking bolt! If the driver's cab is tipped up while the machine is bent, the front frame can cause damage to the windscreen! 5. Open the bonnet. 2-26 WA90-5 – VEAM270100