Foreword 1.3 Introduction 1.3.3 Visibility from operator's seat The visibility standards (ISO 5006) for this machine require a view shown in the diagram on the right side. 1 m Visibility in immediate area The visibility of this machine in the area 1 m from the outside surface of the machine at a height of 1.5 m is shown in the dia- gram on the right side. The hatched area (A) shows the area where the view is blocked by part of the machine when mirrors or other aids to visibility are installed as standard. Please be fully aware that there are places that cannot be seen when operating the machine.
1 m GK038001 12-M Radius visibility The visibility at a radius of 12 m from the machine is as shown in the diagram below. The hatched areas (B) show the areas where the view is blocked when mirrors or other aids to visibility are installed as standard. Please be fully aware that there are places that cannot be seen when operating the machine. 12 m GK038002 WA380-6H – VEAM440100 1-9