SAFETY PRECAUTIONS SECTION 2 Page 5 BEFORE STARTING THE ENGINE The operator must be alert, physically fit and free from the influences of alcohol, drugs or medications that might affect his eyesight, hearing, reactions or judgment. Observe and know the use of alternative exits from the operator compartment. Safety must always be the operator's most important concern. He must refuse to operate when he knows it is unsafe and consult his supervisor when safety is in doubt. The best safety device is a safe operator. Do not use controls or hoses as hand holds when climbing on or off the machine. Hoses and controls can move and do not provide solid support.
Movement of the controls may cause inadvertent and unexpected movement of the machine or its equipment. Follow all machine-mounted safety signs before starting, operating, maintaining or servicing the machine. Be sure the area of the operator's compartment, all mounting steps and grab handles are free of oil, grease, loose objects, ice and mud to lessen the possibility of slipping. Remove or secure all maintenance and personal items so they will not interfere with the operator or jam the controls. Perform a visual check of the machine before starting the engine. Look for such things as improper fluid levels, oil leaks, and loose, damaged or missing parts.
Do not start the engine until any unsafe conditions are corrected. Secure all caps and filler plugs. Know and understand the traffic flow patterns of your job and obey flagman, signs and signals. Before entering the operator's compartment, clear the immediate area surrounding the machine of personnel and obstructions. Walk completely around the machine. After entering the operator's compartment, sound the horn to clear the immediate area of the machine. Due to the danger of fire and explosion, never check or fill fuel tank or batteries near lighted smoking materials or open flame or sparks. 2.3. OPERATION Check work area for hazardous conditions.
Be alert for soft ground conditions, especially when working on slopes, near drop-offs or excavations or fill material, which could lead to sudden tipping of the machine. At night and times of poor visibility, carefully check the work area before moving in with the machine. Use all lights provided. Keep the windshield, windows and mirrors (if equipped) clean. Before starting the engine, be sure you understand all control functions. Check all controls, including the brakes, decelerator, steering and transmission. Check all gauges, warning lights and safety devices. Correct any malfunctions. Only one person, the operator, should be permitted to ride on the machine when it is in operation.
Perform an operational check of the machine in a safe area before putting it to work. DRESSTA TD-25H