TM 5-3805-280-10 Operator’s Station BUZZER AND BUZZER STOP SWITCH THE BUZZER SOUNDS WHEN: Engine oil pressure is low (indicator light (C ) will also light). If engine oil pressure is low, stop the engine immediately. NOTE: The buzzer cannot be turned off when engine oil pressure is low. Engine coolant overheats (indicator light (B) will also light). If coolant temperature is high, push buzzer stop switch (A), reduce load immediately, and run engine at decreased engine speed. If high temperature continues, stop the engine. Check fluid levels.
When the buzzer stop switch is pushed and released the buzzer stops sounding and the buzzer function is automatically reset for the engine coolant overheat function. T107674 –UN–27FEB97 TO RESET THE BUZZER: Turn the key switch to OFF. The buzzer will not sound more than once for the same problem unless the switch is reset. TX,10,DH5832 –19–24JUL97–1/1 WIPER SWITCH Wiper switch (A) has three positions. INT position.......Wiper starts operating intermittently. ON position........Wiper operates continuously OFF position.......Wiper automatically stops operating. T101626 –UN–20JUN96 NOTE:
The wiper and washer do not operate unless the upper front window is closed and the right-side lock pin is installed. TX,10,DH5468 –19–18JUN96–1/1 2-11