B-2: INSTALLATION OF TRAVEL PIPING 1. Remove the blind plate from Hit piping @ , then x 2) (sent as individual parts) and connect the hose. replace the O-rings with new O-rings (07000-13025 (Fig. 1) Use the same split flanges, bolts, and washers again. 2. Install speed selector pilot hoses @ (07103-50312 x 2), drain hoses @ (07103-50515 x 2). 3. Install main hoses @ , @ , 0 , and (@ to the (Fig. 3 and Figs. 1.2) center frame side. (Fig. 3) parts (sentt as individual parts), and use the split Replace the O-rings (07000-13032 x 8) with new 4. Using the separately sent flanges (07377-01018 x flanges, boks, and washers again.
4), short circuit @ and @ , and 0 and @ On both the left and right sides of the machines. (Fig. 4) washers again. Use the same O-rings, split flanges, bolts, and [Shot-t circuit] Related parts for high, low pressure hoses (Parts sent individually) Part No. Part Name Q’ty Remarks 07000-13032 O-ring 16 For@,@,@,@ 07000-13025 O-ring 2 For part @ 07377-01018 Flange To short circuit 34