C-5: INSTALLATION OF OPERATOR’S CAB ASSEMBLY * Be extremely careful not to break or damage the glass Types of mounting bolts (Parts sent individually) I Part No. Part Name of the operator’s cab when installing. o’n/ 1. Raise the operator’s cab assembly, set in position, and install 9 mounting bolts. (Only when installing 01010-51270 Bolt 6 01010-51250 Bolt 3 high cab) 01643-31232 Washer 9 I?? kg Operator’s cab assembly: 300 kg 08174-33023 Mirror 1 * Before installing the operator’s cab, loosen 4 205-54-68480 support 1 control box assembly, and move the box to the mounting bolts (mounting to floor) of the left 207-54-I 7840 Cl amp 1 * After installing the operator’s cab, if there is inside.
01252-41025 Bolt 2 interference between the operator’s cab and the right panel, loosen 5 mounting bolts (mounting to floor) of the right control box assembly and move the box to the inside to ensure a clearance. (Clearance: Min. 2 mm) 2. Install the mirror to the operator’s cab stay. (Approx. 100 mm from the stay corner) Bolt Install the Q=50 bolts at the 3 Places marked; Install the Q=70 bolts at the other 6 places. 50