+ If the electric wiring and push-pull cables between the disconnected during transportation, connect them as air conditioner unit and control panel have become follows. 1) Set the control levers to the positions shown in the 2) detail diagram of the control panel. Install the cooler temperature adjustment cable to the lever at the air conditioner unit end. When in- stalling, connect the cable wire to the unit lever, then secure the cable to the unit. move the unit lever by hand to the LOW position, 3) Install the heater temperature adjustment cable to the lever at the air conditioner unit end.
When in- stalling, connect the cable wire to the unit lever, move the unit lever by hand to the HIGH position, then secure the cable to the unit using the supplied 4) clamp. Install the vent selector lever cable to the lever at the air conditioner unit end. When installing, con- nect the cable wire to the unit lever, move the unit lever by hand to the FACE position, then secure the 5) After installing the cables, check that the unit works cable to the unit using the supplied clamp. 6) properly. Connect the air conditioner unit wiring. control panel in the cab to the connectors at the Connect the wiring connectors assembled to the side face of the air conditioner unit. (See View 2) 54