POWER TAKE OFF 00-11 NPA0023E Legend 1. Hoist cylinder 7. PTO with oil pump 2. Piston 8. Hydraulic operating fluid container 3. Pipe 9. Hydraulic operating fluid 4. Oil tank 10. Test hose joint 5. Low-pressure hose 11. Test hose 6. High-pressure hose Preparation 1. Because removal of a spare tire makes work easier according to a truck, previously check the truck. 2. Remove the intermediate fixed clip on the truck side between the oil pump and the oil tank of the low-pressure side hose and set the low-pressure hose free. 3. Prepare a cleaned hydraulic operating fluid con- tainer (a 20 L can will do), a funnel, hydraulic oper- ating fluid, a test hose for a special tool, and a test hose joint.
4. Prepare the hydraulic operating fluid of about 10 L in the cleaned hydraulic operating fluid container. Hydraulic Operating Fluid (Turbine Oil) Notice: Carefully control the prepared hydraulic operating fluid so that dust or foreign matter will not be mixed in it. Be- Manufactured by ShinMaywa Indus- tries Co., Ltd. 0 to 30°C (86°F): VG32 20°C (68°F) or more: VG56 less than 10°C (50°F): VG22