POWER TAKE OFF 00-45 NPA0100E NPA0102E Legend 1. Idle gear shaft 2. Idle gear Legend 1. Front ball bearing 2. Output shaft 7. Bolt 8. Case Cover Remove the front ball bearing from the output shaft. Remove the bolt and remove the case cover. NPA0101E NPA0103E Legend 1. Front ball bearing Legend 1. Case cover 2. Bolt 11. Output Gear 12. Thrust Collar 9. Front Ball Bearing 10. Output Shaft Remove the output gear and the thrust collar from the gear case. Strike the end face of the output shaft from the rear side and remove the front ball bearing while it is being installed in the output shaft. Notice: Check the orientation of the output gear and the thrust collar.
The side in which the shift arm groove of the gear and the taper of the thrust collar exist is the rear side.