Hino — Supply Procedure of Hydraulic Operating Fluid

00-8 POWER TAKE OFF Notice: Raise the body (cargo deck) paying full attention to safe- ty and firmly hold the body (cargo deck) by the safety rod and safety strut. NPA0017E Legend 1. Clutch pedal 5. When the clutch pedal is slowly returned, the body (cargo deck) is raised. NPA0019E Adjust raised speeds according to the pedal feel of the accelerator. Supply Procedure of Hydraulic Operating Fluid When raising the body (cargo deck), be sure to check the lock of the dump lever. Notice: Be sure to supply a specified amount (check it by the level plug) of hydraulic operating fluid using a cleaned oil supply container paying full attention so that dust or for- eign matter will not be mixed in.

After having supplied oil, firmly tighten each plug. When replacing the total amount of hydraulic operating fluid, request a service network (SS store) of a body manufacturer. 1. Remove the oil supply plug and level plug of the oil tank in the engine stopped state. 2. While supplying hydraulic operating fluid from the oil filler port, supply it until the hydraulic operating fluid flows out from the level plug. 3. Remove the “Safety strut” once and raise the body (cargo deck) to the most raised position, then re- hold it by the “Safety strut and safety rod”. 4. Additionally supply hydraulic operating fluid.

When the hydraulic operating fluid flows out from the level plug, install and firmly tighten the level plug and the oil filler port plug. 5. After having supplied hydraulic operating fluid, re- move the “Safety strut” and store the “safety rod”. Subsequently firmly drop the body (cargo deck) and stop the engine. After having raised the body (cargo deck), held the body by the safety rod and the safety strut and stop the engine. Notice: Suddenly returning the clutch pedal is very dangerous. Use the engine at about 1,000 to 1,500 rpm, and do not perform high-speed rotation, sudden acceleration and deceleration, and unnecessary idle rotation. Notice:

Supply the hydraulic operating fluid used with reference to the following table. NPA0018E