EXPLANATION OF COMPONENTS OPERATION HORN SWITCH When the button(7) at the tip of the right work equipment con- trol lever is pressed, the horn will sound. KNOB SWITCH Knob switch (8) on the left work equipment control lever is used to actuate the power max and slow-down functions. Press once (single click) and keep the switch pressed. The one-touch power max. function is actuated for a maximum of 8.5 seconds at A and E mode. ROOM LAMP SWITCH NOTICE Be sure to switch the lamp to the OFF position after use. If the switch is left at the ON position, the battery will run down. This switch (9) is used to light up the room lamp. ON position: Lights up OFF position:
Goes out It will also light up even when the engine is not running. 3-20