General Information 00 Lubrication and Fluid Level Check: 00–04 Maintenance Operation 00–04, Lubrication and Fluid Level Check Operation Table 8 summarizes all op- erations that must be performed to complete the Lu- brication and Fluid Level Check operation 00–04 called for as an M1 maintenance interval for Service Schedule I, II, and III vehicles, and as an M2 mainte- nance interval for Service Schedule IV vehicles. Maintenance operation numbers given in the table are reference numbers used to help you find detailed instructions in the manual on the lubrication or fluid check. Maintenance Operation 00–04 Lubrication and Fluid Level Check for Service Schedules I, II, III, and IV Maint.
Operation Number Operation Description Service Schedules I, II, and III (at M1) Service Schedule IV (at M2) Check 25–01 Eaton Fuller Clutch Release Bearing Lubrication 25–02 Clutch Release Cross-Shaft Lubrication 25–03 Sleeve Assembly Bronze Bushing Lubrication 26–04 Transmission Fluid Level Inspection 31–02 Fifth Wheel Lubrication 31–04 Trailer Electrical Connector Lubrication 32–02 Suspension Lubrication 33–01 Knuckle Pin Lubrication, Meritor Axles 33–03 Tie Rod Lubrication, Meritor Axles 33–05 Knuckle Pin Lubrication, Dana Spicer Axles 33–06 Tie Rod Lubrication, Dana Spicer Axles 33–09 Kingpin Lubrication, Detroit Axles * 33–10 Tie Rod Lubrication, Detroit Axles * 35–02 Axle Breather and Axle Lubricant Level Inspection 41–02 Driveline Lubrication 42–05 Dana Spicer Camshaft Bracket Lubrication 42–06 Dana Spicer, Haldex, and Gunite Slack Adjuster Lubrication 42–07 Meritor Camshaft Bracket Lubrication 42–11 Versajust Slack Adjuster Inspection and Lubrication 46–03 Power Steering Fluid Level Inspection 46–04 Power Steering Gear Lubrication 46–05 Drag Link Lubrication 46–06 Rack and Pinion Steering Inspection 60–02 Cab Tilt Pump Reservoir Fluid Level and System Check 72–01 Door Seal, Door Latch, and Door Hinge Lubrication Century Class Trucks Maintenance Manual, August 2017 00/8