14A-2 Service Information Guide (All) Contents included in service information 1. Contents included in service information Connection Includes the connection procedures for wiring, piping, etc. Removal Includes the removal procedure when repairing parts, devices, etc. Writing Includes the writing procedure necessary when replacing the ECM or supply pump. Installation Includes the installation procedure when repairing parts, devices, etc. Setting Includes the setting procedure necessary when replacing the ECM, etc. Disassembly Includes the disassembly procedure when overhauling a unit, assembly part, etc. Replacement Includes the procedure for replacing parts, changing oil, etc.
Assembly Includes the assembly procedure when overhauling a unit, assembly part, etc. Prioritized DTC Includes DTCs that need to be diagnosed and resolved before the relevant DTC when multiple DTCs are set. Inspection Includes inspection items for parts requiring inspection to ensure continued performance of parts, devices, etc. Values are listed for parts whose specified values, setting values, and use conditions have been determined. Diagnosis Includes the diagnostic procedure for troubleshooting symptoms. DTCs are listed in order of priority. Cleaning Includes the cleaning procedure for parts, devices, etc.
Repair verification Includes the procedure for verifying resolution of the symptom by using numerical values, etc., other than the verification that DTCs are cleared. Preparation Includes the preparatory procedure necessary before removing parts, devices, etc. Adjustment Includes the adjustment procedure if adjustment to the set or specified values is necessary when performing assembly or installation. Functional description Includes the detailed functional description related to the functional inspection. Symptom description Includes the detailed symptom descriptions related to a diagnosis by symptom.
Measurement Includes the measurement procedure for determining if the installation position of parts is correct, etc. DTC description Includes the circuit description related to DTCs. Drain Includes the draining procedure for oil, etc. Setting conditions Includes the conditions and the judgment conditions for the ECM, etc. to set DTCs. Refill Includes the refilling procedure for oil, etc. Air removal Includes the air removal procedure when air removal is necessary after changing oil, etc. Action taken when set Includes the information related to the control actions taken by the ECM, etc., when DTCs are set. Precaution Includes the maintenance precautions specific to each item.
Items related to ETM Items related to the ETM are described in the instructions on how to view the wiring diagram. Disconnection Includes the disconnection procedures for wiring, piping, etc. 2. Arrows and symbols Find manuals at https://best-manuals.com Find manuals at https://best-manuals.com