. SAFETY PRECAUTIONS FOR MAINTENANCE Parts may break or be sent flying. Set work equipment lock lever (1) to the LOCK position to prevent the work equipment from moving. Turn parking brake switch (2) to the ON position to apply the parking brake. Do not touch any control levers. If any control lever must be operated, give a signal to the other workers to warn them to move to a safe place. 2 - 34 TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING To prevent injury, do not carry out maintenance w ith the engi ne running.
If maintenance must b e carried out with the engine running, carry out the operation with at least two w orker One worker must always sit in the operator's se at and be re ady to stop the engin contact with the o workers must maintain When carrying ou ther rotating parts, the be careful not to c re is a hazard of being c aught in the parts , so Never drop or inse rt tools or other objects into th e fan o r fan belt. INSPECTION AND MAINTENANCE AFTER TURNING E.C.S.S. SWITCH OFF For machines equip ped with a E.C.S.S. low er the b ucket to th e ground, turn the E.C.S.S. switch OFF, and stop the engine before startin g inspection or maintenance. rn the switch ON during inspectio n or maintenance