44 FM50 MIXING HOPPER (RH) REF NO. PART NUMBER QTY DESCRIPTION REMARKS 50. 114-021 1 NIPPLE (12N-3-1/2") 49. 178-645 1 CONTROL ROD 48. 106-162 44 FLG SCREW (M8-1.25 X 20MM) 47. 114-017 1 STREET ELBOW (48N-48NF90) 46. 115-300 1 NIPPLE (48N-4") 45. 110-964 1 DRAIN (08N) 44. 106-551 28 CLIP NUT (M8-1.25) 43. 153-756 1 REDUCER (32N-08NF) 499-400 - LEVER 42. 120-060 1 SHUT-OFF (48NF-48NF) 51. 157-037 1 O-RING (011 D90) 74. 309-136 1 VALVE HANDLE 73. 153-779 1 HYD LINE (-04) 72. 105-836 2 FLG LOCK BOLT (1/4-NC X 1/2") 71. 315-537 1 BRACKET 70. 154-911 1 HOSE (04OFX-36"-3000AR) 69. 154-339 1 CONNECTOR (04N-04O) 68. 120-121 1 BALL VALVE (12NF-12NF) 67. 106-385 4 FLG LOCKNUT (M6-1.00) 66.
106-712 4 FLG SCREW (M6-1.00 X 16MM) 65. 110-348 8 POP RIVET (3/16" X .664") 64. 106-386 12 FLG LOCKNUT (M8-1.25) 63. 116-525 2 BUMPER 62. 106-387 8 FLG LOCKNUT (M10-1.50) 61. 107-700 8 CARRIAGE BOLT (M10-1.50X20MM) 60. 120-090 1 SHUT-OFF(04NF-04NF, NONVENTED) 59. 115-166 1 NIPPLE (04N-1.5") 58. 115-153 1 PLUG (04N, SQ) 57. 166-357 1 GROOVED COUPLING (40-40) 56. 310-326 1 RISER 55. 116-636 AR BULK HOSE (3/4", SOLD PER 1') 54. 110-026 2 WORM CLAMP (1/2" TO 1-1/4") 53. 107-135 4 CLIP NUT M8-1.25 52. 105-509 1 COTTER PIN (1/8" X 1") USE 1 @ 16" SEE FOOTNOTE 1 USE BEFORE S/N: CMWFM50XE70000023 300-5106 1 VALVE HANDLE 79. 115-207 1 NIPPLE (20N-2") 78. 110-057 1 CLAMP (1/2") 77.
105-003 2 FLG LOCKNUT (5/16-NC) 76. 153-151 2 S/O COUPLER (12N-12H90) 75. 114-008 1 PLUG (32N, SQ, GALV) USE AFTER S/N: CMWFM50XE70000024 INCLUDED WITH 214-838 USE BEFORE S/N: CMWFM50XE70000023 USE AFTER S/N: CMWFM50XE70000024 150-1896 1 NIPPLE (20N-2") 83. 115-167 1 PLUG (12N, SQ) 82. 310-358 1 LIQUID HOPPER 81. 105-070 4 LOCK WASHER (1/2") 80. 105-208 4 BOLT (1/2-NC X 1-1/4") INCLUDED WITH 211-028 INCLUDED WITH 211-028 INCLUDED WITH 211-028 85. 105-894 4 LOCKNUT (M10-1.50, PRV TRQ, 10.9) 84. 105-118 8 WASHER (3/8") NOT SHOWN: FOOTNOTES: 1. HANDLE ON REF NO. 31 MUST BE REMOVED AND REPLACED WITH REF NO. 74 NOTE: 11 ID0028088