Engine Specifications Mega 300-III Shop Manual SPECIFICATIONS 2-3 Model Daewoo D2366T Type 4 Cycle In-line 6 Cylinder Diesel, Turbocharged, Water-cooled Combustion Chamber AVL Toroidal Combustion System Direct Injection Cylinder Bore and Stroke 123 mm x 155 mm (4.84" x 6.10") Engine Displacement 11,051 cm3(674 in3) Direction of Rotation Counterclockwise (viewed facing flywheel) Compression Ratio 16.5 :
1 Rated Flywheel Horsepower 208 Metric Hp (205 Hp) @ 2,200 RPM with Fan Torque Output 83 kg m (684 ft lb) @ 1,300 RPM with Fan Fuel Filter (Two-stage) Felt Primary Element Paper Secondary Element Cylinder Firing Order 1-5-3-6-2-4 Mass (Dry) 920 kg (2,028 lb) Engine Oil American Petroleum Institute/SAE Class CC/CD or better (Class CD-II, CE, CF-4, CG-4) Injector Nozzle Type NP-DLLA 150 SV 3117308 Fuel Injection Timing 5.6° BTDC Valve Timing Intake Open @ 18° BTDC Intake Close @ 34° ABDC Exhaust Open @ 46° BBDC Exhaust Close @ 14° ATDC Fuel Injection Pump NP-PE6P120/720 RS300 Governor NP-EP/RSV 200-1300PO39C 311 Timer Type NP-EP/SP 600-110025.5R Supply Pump Type NP-FP/KP Batteries 2 x 12 V, 200 Ah Charging System Regulator IC Type (Integrated Circuit) Alternator 60 amp, 24 V (IC Type) Starter 6.6 Kw, 24 V (Magnet Type) Engine Oil Capacity 21 l (22 qt) 25 l max./17 l min (26 qt max./18 qt min) Engine Oil Pressure Ranges At Idle At Normal Speed 0.8 – 1.4 kg/cm2(11.4 – 20 psi) 4.8 kg/cm2(68.3 psi) Thermostat Temperatures Opening begins @ 82°C (180°F), Fully open @ 95°C (203°F) Coolant Capacity (Engine only) 19 l (20 qt) Engine Coolant Thermostat Wax-Pellet Type Maximum Engine Tilt 35 degrees (Fore/Aft and Rt/Left) Turbocharger Type Exhaust Gas Driven Lubrication Pressures At Idle At Max.
Engine RPM Min. 0.8 bar (11.6 psi) Min. 2.0 bar (29 psi) Rotor Shaft Axial Clearance Max. 0.25 mm (0.0098") Rotor Shaft Radial Clearance Max. 0.5 mm (0.0197")