3.4 ELECTRONIC MONITORING AND CONTROL SYSTEM ECS OPERATION Fault and Information Message List The messages are divided into four groups as follows: Explanation of Control Signs shown at the beginning of the first text line: 158 Group 1 The fault messages of group 1 will be stored and result in: G Start blocked condition or G Automatic engine speed reduction to low idle or G Automatic shutdown of the Shovel or G Attention of Service Staff required. Message page numbers of start blocked conditions: G 500, 506, 530, 536, 542, 554, 578, 584, 596, 608, 620, 626, 638, 644, 650, 656, 704, 710, 722, 728 and 734. Message page numbers of automatic engine speed reduction to low idle:
G 524, 602, 614, 662, 668, 674, 680 and 686. Message page numbers of shutdown conditions: G 518, 548, 560, 566, 572, 590, 632, 698, 716, 740 and 746. Message Text Pages: 500 - 751 Group 2 The fault messages of group 2 will be stored. The following messages will result in automatic engine speed reduction to low idle: G 1286, 1292, 1298 and 1304. Message Text Pages: 752 - 1309 Group 3 The fault messages of group 3 will be stored. Message Text Pages: 1310 - 1319 Group 4 The fault messages of group 4 will not be stored. Message Text Pages: 1320 - 1535 $M : The Dollar sign serves as a reference signal for on- line data transfer on machines using the Modular Mining Dispatch System ”MMS”.
The letter "M" indi- cates that the message comes from a KMG machine.. # : Message will not be stored. ? : Recording of this message in the protocol memory is accomplished with ”COMING” registration only.