MAINTENANCE 4.13 EVERY 2000 OPERATING HOURS OR YEARLY 4.13.2 EMERGENCY ESCAPE LADDER - INSPECTION See illustration Z 22461 (1) Sliding window, serves also for emergency exit (2) Rigidly mounted emergency escape ladder (3) Rope ladder. The upper end of the rope ladder is fixed onto the lower rung of the rigid escape ladder (2) by means of the fasteners (4), see detail (X). The lower end of the rope ladder is fixed on brackets (6) and secured with rubber fasteners (5), see section (A-A). (4) Hooks for fastening the rope ladder onto the rigid ladder (2) (5) Rubber fasteners for rope ladder in lifted position (6) Bracket for rope ladder in lifted position.
The lower rung of the rope ladder is hooked up into the brack- ets (6) (1) Sliding window, serves also for emergency exit Check rigidly mounted emergency escape ladder (2) for good condition and proper fastening. Check rope ladder (3) for good condition and proper fastening. If any damage or bad condition is found replace the concerned parts without delay. 451