11. EXPLANATION OF COMPONENTS 11.5.7.1 BLADE HOLD The control lever automatically returns to this position from any position except the float position when the lever is released. The blade will remain the same position as it was when the lever was released. 11.5.7.2 BLADE RAISE Pull the control lever back to raise the blade. When released the lever will return to the hold position. 11.5.7.3 BLADE LOWER Push the control lever forward to lower the blade. When released the lever will return to the hold position. II .5.7.4 BLADE FLOAT With the control lever in the float position, the blade is free to follow the contour of the ground.
To place the control lever in the float position, push it all the way forward to its detented position. The lever will remain in this position until manually returned to the hold position. 2-16