SAFETY, NOISE AND VIBRATION PLATES 2.1.3 POSITION OF THE NOISE PLATES ON MACHINES WITH CAB q The noise plates must always be legible and in good conditions; for this reason, if they are dirty with dust, oil or grease, it is necessary to clean them with a solution made of water and detergent. Do not use fuel, petrol or solvents. q If the plates are damaged, ask for new ones to Komatsu or to your Komatsu Dealer. q In case of replacement of a component provided with a noise plate, make sure that this plate is applied also on the new piece.
NOISE OUTSIDE THE CAB q This value indicates the noise level outside the machine and refers to the noise perceived by persons in the vicinity of the work area. 2000/14/EC NOISE INSIDE THE CAB q This value indicates the maximum noise level perceived by the operator’s ears inside the cab when this is completely closed. 28