PRODUCT IDENTIFICATION 1.4 PRODUCT IDENTIFICATION The Komatsu backhoe loader and its main components are identified by serial numbers stamped on the identification plates. The serial number and the identification numbers of the components are the only numbers that must be indicat- ed to the Dealer when requiring assistance and ordering spare parts. 1.4.1 MACHINE IDENTIFICATION NUMBER (PIN) The machine identification number "PIN" is stamped on the right side of the frame front.
1.4.2 MACHINE IDENTIFICATION PLATE AND PRODUCT IDENTIFICATION NUMBER (PIN) (alternatively for some markets) The Komatsu BACKHOE LOADERS described in this manual are CE marked, in fact they are in full compliance with the EU harmonised standards. The Product Identification Number (PIN) is stamped on the lower part of the plate. The customer must be able to indicate the PIN at any time, that is why it must compulso- rily be written in the following table. The plate with the CE marking is applied inside the cab, on the left vertical wall of the frame, at the height of the brake pedals. MODELLO - MODEL TYP - MODELE MATRICOLA N˚ - SERIAL N˚ FABR. NR. - SERIE NR.
ANNO - YEAR BAUJAHR - ANNEE MASSA TOTALE - TOTAL WEIGHT GESAMTGEWICHT - POIDS TOTAL POTENZA MOTORE - ENGINE POWER LEISTUNG - PUISSANCE MOTEUR kg kw Product Identification Number PIN MANUFACTURED BY KOMATSU UTILITY EUROPE S.p.A. 36025 NOVENTA VICENTINA (VI) - ITALY 37A-98-11820 37A-98-11820 RKA14970 MODEL SERIAL N˚ TOTAL WEIGHT YEAR kg ENGINE POWER kw Product Identification Number PIN MANUFACTURED BY KOMATSU UTILITY EUROPE S.p.A. 36025 NOVENTA VICENTINA (VI) - ITALY 6