INSTRUMENTS AND CONTROLS 9 - BATTERY DISCONNECTION SWITCH (if provided) The battery disconnection switch (9) is positioned on the left side of the machine, inside the engine compartment, and can be reached by opening the engine hood (see "3.5.1 ENGINE HOOD"). It is possible to interrupt the passage of current from the battery to the electric system of the machine by turning the switch counterclockwise and releasing it. Always interrupt the passage of current before carrying out any operation on the battery or the electric system and before carrying out any welding operation on the machine. To restore the electric contact, put back the switch and turn it clockwise.
10 - APERTURE FOR THE INSTALLATION OF A CAR RADIO (if provided) If the machine is provided with an aperture for the installation of a car radio, remove the cover (10) and install the radio. IMPORTANT q For use, keep to the instructions contained in the booklet supplied together with the radio. 88