SERVICE DATA 1.5 Cooling system Table 2-5 Maintenance service data table - Cooling system Unit: mm [in.] 1.6 Inlet and exhaust system Table 2-6 Maintenance service data table - Inlet and exhaust system Unit: mm [in.] 2-7 Inspection point Nominal Standard Limit Remark Temperature at which valve starts opening 76.5 ± 1.5°C [170 ± 3.5°F] Temperature at which valve lift is 9 [0.35], minimum 90 ± 1.5°C [194 ± 2.7°F] Inspection point Nominal Standard Limit Remark 0.2 [0.008] or less 0.057 to 0.103 [0.0022 to 0.0041]