01-030 Removal and installation of englne Preceding work: Removal and fairing (01-006). Removal and installation of bottom engine compartment R emoval and installation of radiator (20-420). installation of air filter (09-400 or 09-410). Battery positive cable .................... disconnect, connect. Alternator cable connector Fan (75) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ................. detach (step 3). remove, install, 25 Nm. Lines for pressure oil pump ................ detach, attach (step 4). Cover for evaporator ..................... insert (step 5). Cover for engine wiring harness ............. remove at component partition wall (steps 6 and 7).
Starter wiring harness .................... remove, install (step 8). Terminal block terminal 50 ................. disconnect, connect (step 9). disconnect, connect at terminal block (step 10). Terminal 30 Engine wiring harness ........................... .................... disconnect, connect at the individual connections (steps 11 to 18). 01.0904 . 030/l