33 Unbolt high pressure oil pump, bolt on (arrows) and place to the side with the lines connected, tightening torque 25 Nm. 34 Unbolt AC compressor (425) at the supporting bracket, bolt on, and place to the side with lines connected. Bolts (149b), tightening torque 25 Nm. Unbolt bracket (b), bolt on. 35 Attach engine hoist into the suspension lug of the engine. Adjust engine hoist so that the engine can be raised horizontally. e. g. vacuum, oil, fuel lines and electric cables, running to the engine; connect. 36 Disconnect all remaining lines, 37 Insert guard plate (arrow) between component compartment and engine, remove. 01.0904 _ 030113