Tool Requirements C8.3 Industrial Page 2-2 Section 2 - Maintenance Guidelines Tool Requirements General Information Most of the maintenance operations described in this manual can be performed with common hand tools (metric and S.A.E. wrenches, sockets, and screwdrivers). The following is a list of special service tools required for some maintenance operations:
Tool Part Number Description 3375045 Torque wrench 136 N•m [100 ft-lb] locally obtained Silicon lubricant spray locally obtained Brass rod, 4.76 mm [3/16 in] diameter CC-2602J Fleetguard DCA4 test kit CC-2802 Coolant test kit 3824591 Engine barring gear 3375049 Oil filter wrench 3824556 Charge-air cooler (CAC) pressure kit 3376807 Engine coolant and fuel filter wrench 3822524 Belt tension gauge, click type (v-belts and v-ribbed with four or five ribs 3822525 Belt tension gauge, click type (v-ribbed with six to twelve ribs) Contact the nearest Cummins Authorized Repair Location for the required service tools. A computer is required to run the OEM software.
Contact a Cummins Authorized Repair Location for information on hardware requirements.