Ch 2 page 101 TRANSMISSION Remove the O-rings (1). Figure 260 Insert shaft into the locking device (S1). Mount special tools (S2 and S3) until contact and loosen the slotted nut. (S1) Locking device 850317-00083 (S2) Slotted nut wrench 850316-00382 (S3) Wrench insert 850316-00383 Figure 261 Press the shaft (1) out of the idler (2) under a hydraulic press. Pay attention to the released components! Figure 262 Remove the upper roller bearing (1) and the bearing outer ring (2) from the idler. Figure 263 SHOP MANUAL