TRANSMISSION Ch 2 page 126 Preload the baffle plate with cup spring set until the snap ring (1) can be engaged into the groove. (S) Assembly fixture 850317-00079 Figure 349 To ensure a correct measuring result, install single parts with out oil for the time being. Assemble the end plate (1). Figure 350 Alternately assemble HA30F=10 pcs./ DA40F=12 pcs of inner clutch disks (1) and 10 pcs. of outer clutch disks (2 ) into the disc carrier (3). CAUTION Starting with an inner clutch disc! Coated side of the inner and outer clutch discs must always be installed showing to the piston! Depending on the parts list version, a disc arrangement with 9 inner and outer discs may be installed!
Please refer to the relating spare parts list to see the installed disk arrangement! Figure 351 Install the end plate (1) and fasten the disc set with snap ring (2). Installation position of end plate (1) Figure 352 SHOP MANUAL