Ch 2 page 171 TRANSMISSION Assemble running disc 80x105x5.75 (1), axial bearing 80x105x4 (2) and axial washer 80x105x1 (3) and oil them. NOTE Install running disc (1) with the chamfer showing to the axial bearing (see arrow) Figure 524 Assemble and oil the needle cage 80x88x46 (1). Figure 525 Align the inner clutch discs and assemble the idler (1) until contact is obtained. By means of short left-hand/right-hand rotations mount the inner clutch discs onto the inner disc carrier. Figure 526 Assemble and oil the axial washer 80x105x1 (1), the axial bearing 80x105x4 (2) and the axial washer 80x105x1 (1). Figure 527 SHOP MANUAL