Ch 2 page 179 TRANSMISSION Assemble the disc carrier (1) onto the sun gear shaft (2) until contact is obtained. Use safety gloves! Adjust the disc carrier after cooling down! Figure 554 Axially fix the output shaft with the V-ring. Legend: 1 = Output shaft cpl. 2 = V-ring 3 = Disc carrier 4 = Sun gear shaft Figure 555 Align the inner clutch discs and assemble the output shaf (1) until contact is obtained. By means of short left-hand/right-hand rotations mount the inner clutch discs onto the output shaft. Figure 556 Preassemble the planet carrier Figure 554 - Figure 556. Preassemble the planetary gears (1).
1 = Planetary gear (4x) 2 = Thrust washer (8x) 3 = Needle cage 25x33x20 Oil the needle cage! Figure 557 SHOP MANUAL WARNING CAUTION NOTE