TRANSMISSION Ch 2 page 232 Disassembly of LKV Axle Insert Disassembly Place the axle insert into the clamping device by means of the lifting tackle and fix it (S) Assembly truck K9005577 (S) Clamping device 850317-00096. Figure 748 1.Loosen hexagon screws (1) and remove washer (2). Figure 749 2.Remove the O-ring (1). 3.Pull off output flange (2). 4.Remove shaft seal ring (3) from housing hole. Figure 750 5. Loosen hexagon screws (1) and remove washer (2). Figure 751 SHOP MANUAL