TRANSMISSION Ch 2 page 254 25. Screw in and tighten screw plug with O‑ring (1). Tightening torque: 35 Nm 26. Screw in and tighten screw plug with O‑ring (2). Tightening torque: 50 Nm Figure 830 Mounting the axle drive 1. Oil O‑ring (1) and fit it in the annular groove. 2. Mount the axle drive with Eyebolt and crane. Figure 831 3. Screw in and tighten new, oiled hexagon screws with Power screwdriver. Tightening torque: 1,900 Nm Figure 832 4. Bolt in screw plug with O-ring (1) and tighten. Tightening torque: 150 Nm 5. Bolt in screw plug with O-ring (2) and tighten. Tightening torque: 50 Nm Figure 833 SHOP MANUAL