Ch 2 page 261 TRANSMISSION Assemble the bracket between engine and transmission. Figure 840 Fix adjustment tools to align the transmission and engine. 2x HA30 MX531192 2x HA45 MX529833 One on transmission flange and one on engine flange. Mount centering mandrel f/eng.-tran. Use shim so mandrels aligns to center up/down (+) 4mm (when tightening engine moves about 3-5mm down) Tolerance for engine installation is 3,5mm 1.5 Centerline ш4 Engine angle of inclination is 5 degrees on the HA30 (4,7° - 5,2°) or 3 degrees on the DA40 (2,7° - 3,2°) down in front relative to transmission. Figure 841 Figure 842 SHOP MANUAL